https://precimill.com/Precimill manufactures solid carbide and indexable cutting tools for metalworking: drills, milling cutters, turning inserts, taps, boring systems, tool holders and collets. Standard catalogue items ship from stock, and custom geometries and OEM tooling are produced to drawing.enhttps://precimill.com/automotive-cutting-tools/https://precimill.com/automotive-cutting-tools/Cutting tools for automotive production: high-feed milling, aluminium drilling and PCD-tipped tooling for engine, transmission and structural components.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/aerospace-cutting-tools/https://precimill.com/aerospace-cutting-tools/Cutting tools for titanium, Inconel and aerospace aluminium: high-helix end mills, through-coolant drills and AlTiN-coated tooling for heat-resistant alloys.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/cutting-tool-selection-guide/https://precimill.com/cutting-tool-selection-guide/A working method for choosing cutting tools: start from the operation and the workpiece material, then match geometry, substrate and coating in that order.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/cutting-speed-and-feed/https://precimill.com/cutting-speed-and-feed/How cutting speed and feed per tooth are calculated and adjusted: surface speed, chip load, and the signs that tell you which parameter is wrong.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/resources-tool-selection/https://precimill.com/resources-tool-selection/How to choose cutting tools: the selection sequence, ISO insert grades and part numbers, and how material group decides geometry, substrate and coating.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/resources-cutting-data/https://precimill.com/resources-cutting-data/Cutting speed, feed per tooth and what each parameter controls, plus how to work out true tool cost per part rather than comparing purchase prices.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/resources-troubleshooting/https://precimill.com/resources-troubleshooting/Diagnose cutting tool problems: wear patterns and what each one means, plus process decisions such as thread milling against tapping for a specific job.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/mold-die-cutting-tools/https://precimill.com/mold-die-cutting-tools/Ball nose and hard milling tooling for moulds and dies: long-reach cutters, AlCrN grades for hardened steel to 60 HRC, and radius end mills for deep cavities.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/insert-grade-selection/https://precimill.com/insert-grade-selection/How the ISO insert grade system works: what P, M, K, N, S and H mean, how the colour code maps onto them, and how to move within a grade range.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/coating-selection-guide/https://precimill.com/coating-selection-guide/How cutting tool coatings differ: TiAlN, AlTiN, AlCrN, TiCN, DLC and CVD aluminium oxide, what each resists, and how to match one to a workpiece material.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/tool-wear-diagnosis/https://precimill.com/tool-wear-diagnosis/Reading cutting tool wear: flank wear, cratering, chipping, built-up edge, thermal cracking and notch wear, what causes each, and how to correct it.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/resources-coatings-materials/https://precimill.com/resources-coatings-materials/Cutting tool coatings explained: TiAlN, AlTiN, AlCrN, TiCN, DLC and CVD oxide, what each resists, and how to match one to the material being cut.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/medical-cutting-tools/https://precimill.com/medical-cutting-tools/Small-diameter cutting tools for medical devices and surgical instruments: micro drills, burrs and dental-style geometries in stainless, titanium and cobalt chrome.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/iso-insert-designation/https://precimill.com/iso-insert-designation/How to read an ISO turning insert part number: shape, clearance, tolerance class, chip breaker, size and corner radius, letter by letter with worked examples.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/tool-life-cost-per-part/https://precimill.com/tool-life-cost-per-part/How to calculate true tool cost per part from tool price, edges per tool, tool life, cycle time and downtime, and why a cheaper tool frequently costs more.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/general-engineering-cutting-tools/https://precimill.com/general-engineering-cutting-tools/Cutting tools for job shops: a general-purpose carbide range covering steel, stainless, cast iron and aluminium, available individually with no minimum order.Mon, 12 Oct 2026 15:00:29 +0000https://precimill.com/thread-milling-vs-tapping/https://precimill.com/thread-milling-vs-tapping/When thread milling beats tapping and when it does not: tool cost, cycle time, thread size, material, blind holes and what happens when a tool breaks.Mon, 12 Oct 2026 15:00:29 +0000